How to Identify, Prevent, and Control Common Cauliflower Diseases

How to Identify, Prevent, and Control Common Cauliflower Diseases

Cauliflower, a var. , is a cruciferous vegetable that requires consistently cool temperatures, even moisture, good airflow between plants, and nutrient-rich soil to produce firm, compact heads.

A close up vertical image of a field of cauliflower growing in the sunshine. To the center and bottom of the frame is green and white printed text.guide to growing cauliflower?

To recap, when growing this crop, you can gain the upper hand from the start by selecting disease-resistant varieties for planting, and always gardening with clean hands, gloves, and garden footwear to prevent the spread of disease from one plant to another.

Always be sure to work with sanitized tools as well, and follow best practices to keep soil moist and well-draining, not oversaturated.

Proper spacing for your selected variety is imperative to provide optimal air circulation, and to prevent the roots of one plant from touching another, which will help to inhibit the spread of disease.

Diligent weeding and removal of plant debris, especially of other brassica varieties, helps to reduce the presence of disease hosts and increase airflow.

And finally, rotate your crops to new locations every season to avoid infection by diseases that winter over when you plant again next season.

Of course, even with diligent and attentive care, problems can sometimes still arise.

In this article, we talk about 12 common cauliflower diseases. You will learn how to avoid, recognize, and address each of them.

1. Alternaria Leaf Spot

With about 50 species in total in the genus, several types, including  and , can cause leaf spot.

Also known as early leaf blight, this disease affects brassicas such as cauliflower.

A close up horizontal image of a leaf suffering from Alternaria leaf spot on a white background.Photo by Robert Wick, Wikimedia Commons, via CC BY-SA.

Spores require moisture to germinate. They become active in 60 to 78°F temperatures when conditions are wet, and are transported via wind or splashing water.

Warning Signs of Alternaria Leaf Spot

Tell tale signs are brown to black spots with clear margins that look like targets. They usually start on the leaves as individual spots.

When there are enough of them, they merge to form large dead patches that dry up and fall out of the foliage, leaving large holes behind.

Black spots may also form on developing heads.

Defoliation may be limited to just a few leaves, or it can be extensive, affecting the stems and causing plants to weaken and die.

To Avoid Alternaria Leaf Spot

Plant in a full sun location.

Aim the hose or your watering can at the roots, not the leaves, to avoid creating moist conditions on the foliage.

Another proactive step you can take is to drench the soil with a bio-fungicide that contains at planting time, per package instructions.

This is another type of fungus that inhibits Alternaria spore germination.

To Address Alternaria Leaf Spot

Snip off affected leaves with clean, sharp pruners and discard them in a sealed bag in the trash.

In the case of an extensive infection, apply as a foliar spray per package instructions.

Check out this guide to learn more about how to use  in your garden.

2. Bacterial Soft Rot

Bacterial soft rot is caused by several types of virulent bacteria including .

A close up horizontal image of a cauliflower head infected with disease called bacterial soft rot, pictured on a soft focus background.ranging from 70 to 80°F are favorable for an outbreak, especially if plants are calcium deficient.

Warning Signs of Bacterial Soft Rot

Plants affected by this condition develop soft wet spots on the leaves and/or developing heads that get larger and larger as the plant tissue is broken down by feeding bacteria.

The stems and roots can also be affected. Wilting and discoloration continue until all that remains is a soppy, smelly mess.

This disease may affect harvested crops as well so always refrigerate them immediately to avoid temperature fluctuations that may activate bacteria.

To Avoid Bacterial Soft Rot

Use fresh, clean water to maintain even moisture, but do not oversaturate the planting area.

Be careful not to accidentally injure developing plants with weed whackers or mowers.

Always sanitize garden tools after working on your plants.

To Address Bacterial Soft Rot

Unfortunately, there is no treatment for this disease.

Remove affected plants and dispose of them in a sealed bag in the trash.

Learn more about bacterial soft rot in this guide.

3. Blackleg

Blackleg is caused by the fungus , aka , that produces fruiting bodies called and .

They contain microscopic spores that are dispersed on the wind when the temperature is between 65 to 80°F  and conditions are wet.

The disease may be present in seeds, as well as in plants that develop cracks from especially cold weather, injury, or insect damage.

Warning Signs of Blackleg

The first indications are tan-colored spots on the leaves. Gradually they darken to gray with black dots.

As the disease progresses, the stems may develop lesions, or “cankers” with dark black to purple margins. The damage may move down the stems to the roots, blackening tissue as it progresses.

To Avoid Blackleg

If seed is not certified disease-free, you may treat with hot water before planting by soaking seeds for 15 to 30 min at 122°F.

Don’t plant during a wet spell.

Avoid garden activities near plants in damp weather to minimize spore movement.

To Address Blackleg

Remove affected leaves and discard them in a sealed bag in the trash.

You may apply a foliar fungicide; however, it may be of no use if the infection is extensive. In such a case, remove and discard all affected plant material.

4. Black Rot

Black rot is caused by , a bacterium that likes to feed on susceptible plants when the weather is damp and temperatures are above 77°F.

Warning Signs of Black Rot

The first indications of trouble are yellowing along the margins of the leaves.

A close up horizontal image of a leaf suffering from bacterial soft rot showing yellowing on the edge of the foliage, pictured on a soft focus background.15 minutes at 122°F before planting.

Take care not to injure plants with gardening equipment.

Plant on a dry day and avoid stirring up the garden on wet days.

Keep weeds at bay, particularly those in the mustard family, such as wild mustard and shepherd’s purse.

To Address Black Rot

Immediately remove and discard affected leaves in sealed bags in the trash.

5. Cauliflower Mosaic Virus

Cauliflower mosaic virus (CaMV) is a viral disease transmitted by aphids.

Plants are most likely to be affected when temperatures are between 68 and 82°F when aphids are very active.

Warning Signs of Cauliflower Mosaic Virus

“Vein clearing” and an all-over pattern of light and dark green mosaic mottling are the classic symptoms of CaMV.

A vertical image of two leaves suffering from cauliflower mosaic virus showing discolored areas, pictured on a soft focus background.Photo via Alamy.

Leaf veins are the target. First, they turn yellow, and then narrow slits appear where there had been veins – this is known as “clearing”.

There may be green lines on the veins, called banding, as well as dry spots of dead tissue on the leaves.

The final identifying characteristic is mosaic-patterned light and dark green mottling of the leaves.

To Avoid Cauliflower Mosaic Virus

Keep the garden free from aphids by interplanting with marigolds, or introducing beneficial predatory insects such as ladybugs to control the population.

To Address Cauliflower Mosaic Virus

Where you see aphids, there’s a risk of CaMV. Aim a hose at them to wash them off plants.

If a strong spray from the hose is not enough, treat plants with neem oil or insecticidal soap per package instructions.

6. Clubroot

Clubroot is caused by a fungus, , that lives in the soil, favoring ground temperatures of 73 to 79°F, wet conditions, and acidic soil for activation.

A close up horizontal image of a plant suffering from clubroot, caused by Plasmodiophora brassica, on a dark background.Photo via Alamy.

It causes swelling and deformation, or “clubbing” of plant roots.

Warning Signs of Clubroot

Underdeveloped plants with yellow leaves that are prone to wilting may be suffering from clubroot.

To Avoid Clubroot

Conduct a soil test to ascertain its pH level. The ideal range is 6.0 to 7.0.

Adjust it with agricultural lime, which also contains beneficial calcium. Choose either calcitic or dolomitic lime, based on the results of your soil report, as the second type also contains magnesium, which may or may not be necessary.

Plant in cool, dry weather.

To Address Clubroot

Fungicides are not an effective treatment for clubroot.

Remove all affected plant material and dispose of it in a sealed bag in the trash.

7. Damping Off

Damping off, also called wirestem, is caused by various species of , a parasitic water mold called an oomycete that is similar to a fungus.

This is a soilborne condition that prefers soil temperatures of 75°F and above and wet conditions. When the spores become airborne and make contact with moisture, they germinate.

It strikes otherwise healthy seedlings, rotting their leaves, stems, and roots.

Sometimes the attack happens before they have a chance to break ground, and there are no sprouts.

At other times, the seedlings start to grow leaves, when suddenly they are coated with white thread-like webs, their stems become thin like wires, and they fall over dead.

When mature plants are affected, rotting may begin at the roots and works its way up into the stems.

To Avoid Damping Off

Do not plant in wet weather.

Grow plants in a full sun location. Mold-type pathogens prefer dim, damp places.

When starting seeds in containers, be sure to use a quality sterile potting medium and clean containers.

Make sure pots and containers have adequate drainage holes.

To Address Damping Off

There is no treatment for plants that fall victim to the ravages of . Dispose of affected plants in sealed bags in the trash and sanitize your hand tools.

Learn more about damping off in this guide.

8. Downy Mildew

Downy mildew is caused by , a parasite similar to a fungus that can damage the foliage and heads of cauliflower. Its spores are carried by the wind and germinate in wet environments with temperatures between 58 and 72°F.

Warning Signs of Downy Mildew

Symptoms include yellow spots on leaf surfaces and furry gray mold underneath. Unchecked, leaves and stems may become deformed and eventually die.

To Avoid Downy Mildew

Irrigate at the soil level to avoid wetting the leaves.

Avoid high-nitrogen fertilizers, as they can promote the growth of .

Preemptive applications of a fungicide containing copper may inhibit downy mildew growth.

To Address Downy Mildew

Remove affected leaves and discard them in sealed bags in the trash. Apply a copper-based fungicide per package instructions.

In the event of widespread disease, remove affected plants and discard them in sealed bags in the trash.

9. Powdery Mildew

Powdery mildew appears as a white, moldy coating on the tops of the leaves.

A close up vertical image of a plant with large leaves suffering from powdery mildew with straw mulch in soft focus in the background.Photo by Scot Nelson, Flickr, via CC BY-SA.

It is caused by a fungus, , that produces airborne spores that germinate in temperatures ranging from 70 to 80°F and dry conditions with low humidity.

Warning Signs of Powdery Mildew

The first signs of trouble are white blotches on the leaves. Both the tops and undersides may be affected.

The blotches eventually spread to form a fuzzy layer of thread like mycelia.

As the leaves succumb to the fungus, they turn yellow or brown, at which point other pathogens may invade the infected tissue, leading to rotting and death.

To Avoid Powdery Mildew

Use a balanced fertilizer per package instructions, as too much nitrogen makes plants prone to powdery mildew. Only add extra nitrogen if your soil is deficient.

Apply a sulfur-based fungicide preventatively per package instructions.

To Address Powdery Mildew

Pick off affected leaves and discard them in sealed bags in the trash.

Large-scale infection may require the removal and disposal of all affected plants.

10. Ring Spot

Ring spot, aka black blight, is caused by , an , which is a type of sac fungus.

A close up horizontal image of a green leaf suffering from ring spot, caused by Mycosphaerella brassicicola, a type of fungus.Photo by AfroBrazilian, Wikimedia Commons, via CC BY-SA.

Spores reproduce from sac-like structures, forming minute “fruiting bodies” that require temperatures of 59 to 70°F and damp conditions to germinate.

Ring spot may originate in the seed itself or infect the plant through stomata.

Warning Signs of Ring Spot

If the foliage has brownish lesions with yellowish margins, and a bull’s-eye appearance, fungal colonization may be underway. Unchecked, the blemishes join together and blacken the leaves.

Both leaves and stems may be affected.

To Avoid Ring Spot

You can heat seeds that are not certified disease-free for 30 minutes at 122°F prior to sowing.

Apply a preemptive fungicide that contains Chlorothalonil, an organic, non-systemic compound.

To Address Ring Spot

At the first sign of disease, remove affected foliage.

For limited infection, apply a Chlorothalonil-based fungicide, according to package instructions.

Extensive damage may require disposal of entire plants in sealed bags in the trash.

11. Sclerotinia Stem Rot

Stem rot, aka white mold or white blight, is caused by , an , which is a type of sac fungus.

Spores germinate when temperatures are between 54 and 75°F, with high humidity and water-soaked soil.

It disperses pathogenic spores called ascospores that wreak havoc on roots, foliage, and heads.

Warning Signs of Stem Rot

You may notice the fruiting bodies growing underneath the leaves after a heavy rain that has soaked the soil.

A close up horizontal picture of a small fungus growing out of the ground at the base of a plant.like compost to increase the activity of microbes in the soil and inhibit germination.

To Address Sclerotinia Stem Rot

You can apply a systemic biofungicide that contains the microparasite prior to planting, per package instructions, to prevent sclerotia from germinating.

12. White Rust

White rust, aka white blister, is caused by , a water mold parasite, or oomycete, with especially thick-walled spores called oospores that germinate in cool, damp, and humid environments.

Warning Signs of White Rust

The first indications of disease may be chlorosis, evidenced by yellow blotches on the leaf surfaces.

A close up horizontal image of a hand from the bottom of the frame inspecting a leaf suffering from white rust, pictured on a soft focus background.growing cauliflower in your garden, check out these guides next:

Nan Schiller

Nan Schiller is a writer with deep roots in the soil of southeastern Pennsylvania. Her background includes landscape and floral design, a BS in business from Villanova University, and a Certificate of Merit in floral design from Longwood Gardens. An advocate of organic gardening with native plants, she’s always got dirt under her nails and freckles on her nose. With wit and hopefully some wisdom, she shares what she’s learned and is always ready to dig into a new project!

“How to Identify, Prevent, and Control Common Cauliflower Diseases” was first posted here

Leave a Reply

Get Your Garden Right The First TimeLearn exactly how to build and care for your garden. Sign up and never miss awesome gardening tips and ideas.